RD-1000MX Biomass pellet mill 6.0-8.0T/h

1.This machine is suitable for large biomass pellet processing plants. The capacity is 6.0-8.0 ton per hour. This model of pellet mill is equipped with automatic roller lubrication system and gearbox gear oil automatic lubrication for bearing and cooling system. This model of pellet mill doesn’t need worker to add grease; cooling system controls the gearbox oil temperature, so that the gearbox will be at low temperature operation, which can greatly extend the service life of the bearing and seal ring. Also, this machine is equipped with die-lifting device for roller and ring die which makes the operation and maintenance more convenient.

2.According to the characteristics of biomass raw materials, we have made a special design for the main gear & pinion shaft, and handed to a professional gear factory to complete the processing which makes the main gear & pinion shaft with high precision and long service life.

3.5 sets bearings in gearbox are German FAG bearings and American TIMKEN bearings; the main shaft and the combined quill shaft in gearbox are forged with 42CRMO materials whose strength and wear resistance are better than ordinary materials and is more durable; quill flange and quill shaft are separated which is more convenient for assembly & disassembly; the main components and the gearbox are processed by high-precision CNC machine to ensure the high-precision cooperation of the components, greatly improve the service life of the machine.

4.In response to the poor fluidity of various agricultural and forestry wastes, we have installed a force-feeding system in front of the pelletizing chamber, so that raw materials can easily enter the pelletizing chamber and be pressed. The feeding conveyor is also equipped with the arch breaking device and a variable frequency motor that can adjust the material flow speed, so that the material can enter the pelletizing chamber very smoothly.

5.At the same time, in view of the characteristics of light gravity of biomass raw materials and more ash, we add a sealing device between the door cover and the pelletizing chamber, so that the dust is not easy to leak. The door cover and forced feeder are made of stainless steel to avoid the corrosion of hot steam during pelletizing. The door cover also adds a collection inlet device for hot steam in the pelletizing process, which can be extracted from the hot steam in the pelleting chamber by increasing the dehumidification device, greatly reducing the heat of the pelleting chamber. Thus prolong the service life of the roller bearing.

6.All our pellet mills are equipped with safety devices. If there are small iron nails or too dry and wet raw materials in the pelletizing process, which makes pelleting very difficult, the machine will break the shear pin by itself and force the main motor to stop running to protect the machine from further damage. Therefore, our machine has low failure rate, good stability, low operating cost, high pellets density and good forming degree, which is worth your own.