Pendulum cooling machine

Product Features.
The counter flow cooling principle is adopted to cool the pellets with high temper-ature and moisture.Hot air touches hot pellets and cool air touches cool pellets so asto avoid the pellet surface cracking caused by sudden cooling produced by direct touchbetween cool air and hot pellets.At the same time,the airlock is used for feeding andspace of air inlet is bigger,therefore it can get better cooling effects.Swing discharger has smooth and reliable discharging with less residueLow power consumption,easily operation.Pellet temperature after cooling is +3C-5'C less than ambient temperature lt is suitable for pellet cooling.

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

Product Features.

1.The counter flow cooling principle is adopted to cool the pellets with high temper-ature and moisture.Hot air touches hot pellets and cool air touches cool pellets so asto avoid the pellet surface cracking caused by sudden cooling produced by direct touchbetween cool air and hot pellets.At the same time,the airlock is used for feeding andspace of air inlet is bigger,therefore it can get better cooling effects.
2.Swing discharger has smooth and reliable discharging with less residue
3.Low power consumption,easily operation.
4.Pellet temperature after cooling is +3C5℃ less than ambient temperature
5.lt is suitable for pellet cooling.

Model	SKLB2.5	SKLB4	SKLB6	SKLB8	SKLB10	SKLB12
Capacity (t/h)	2-3	3-4	5-6	7-8	8-10	10-12
Cooling volume (m3)	2.5	4	6	8	10	12
Cooling time (min)	not less than 6-10min
Finished Temp.	No 3-5℃ higher than room temperature
Power (kw)	1.5+0.55	1.5+0.55	1.5+0.55	1.5+0.55+1.1	1.5+1.1+0.75	1.5+1.1+0.75